Combined Line Type Wide Use Armoured Copper Cable Recycling Machine
TF-800 copper cable recycling plant are complete processing line
for copper wire recycling which is applicable for large size
factory. It includes first crusher, second shredder,separator and
dust collector. It can deal with larger size scrap cooper cables
with higher efficiency.
Scrap copper wire cable granulator Advantages :
1.The cable recycling plant adopts dry separation equipped with
dust collecting system.So the working area will be clean and there
will be no pollution surrounding environment.
2.The whole process is controlled by PLC control box with one press
on the button it will start or work.Very easy to operate.
3.Easy commissioning.For processing wires in different diameter,
just change the screen size and adjust the force of blower and
height of baffle in the vibrator.
Copper Cable Recycling Machine Specifications:
|Processed wire diameter||1-40mm|
Waste copper wire recycling line Components and Working principle :
First crusher -- conveyor -- Second Shredder and Electrical Control
Cabinet -- Separator and Dust Collector
1. The first crusher of the recycling plant crushes the
wires/cables into 10—20mm length.
2. By conveyor, crushed wires/cables are conveyed to the second
crusher, which crush them again into 3-5mm length plastic pieces
and copper granules.
3. The mixture is sent to the vibration system. By airflow and
vibration, plastic pieces are separated from copper granules
4. Copper granules and plastic pieces come out of the granulator
from different outlet. Dust is collected by dust collector through
Waste copper wire recycling line Working procedure:
1. Put wires and cables into the crusher, in which they are crushed
and plastic sheath and copper separated completely. The length of
the crushed material is based on the mesh of the riddle: the bigger
the mesh is the longer the crushed material will be and the larger
the output will be. The mesh should be chosen in production
according to the type of the material.
2. The crushed material (mixture of copper granules and plastic
pieces) is conveyed to the separator by the conveyor, during which
procedure dust and part of plastic pieces of light weight(including
fiber, rope, or tapes, etc. mixed in the wires) are collected by
the pressure-reducing blower. The above opening of the pressure
reducing blower is connected with the dust collector opening in
which a dust collecting bag is used to prevent discharge of dust
for the purpose of environmental protection. Dust and part of
plastic pieces of light weight are collected in this bag and will
be discharged when the bag is full.
3. The separator is used for separating plastic pieces and copper
granules. According to the differences of the physical properties
and specific gravity between different materials, there is specific
gravity deviation under the forces of Aerodynamic and Vibration
friction. By adjusting the speed of material conveying and
amplitude parameters, copper granules (of larger specific gravity)
will move to the riddle bottom and move from down to up, and
plastic pieces (of smaller specific gravity) will move to the above
of copper granules and move from up to down, and in the end they
will both be discharged through different openings.
4. All the units are installed on the underbed to form a whole
structure. The machine is adjusted ready for production before
shipping, and the customer only need to connect it to the power