Copper Wire Recycling Granulator Machine With Dust Collecting
TF scrap copper cable wire recycling machine is the equipment that
separating the scrap wire metal and plastic. Because the final
products are similar to rice particles, so this machine is called
wire stripping machine for sale used . It is one of the
environmental protection machines. This equipment can completely
separate the copper and plastic, and realize the integrated
utilization. It has higher economic benefits. No dust and no
Copper cable recycling machine Application(raw materials):
Applicable cables: Waste communication copper cables, motor cable,
car cable, industrial cable,household cable, enamelled cable.
Applicable cable diameter: 0.3-20mm
Copper Wire Granulator Machine Specifications:
|Model||Recycling capacity||Processed wire dia.||Total power||Voltage||Dimension||Weight|
Scrap copper cable recycling machine Working principle
1. Put wires and cables into the crusher, in which they are crushed
and plastic sheath and copper separated completely. The length of
the crushed material is based on the mesh of the riddle: the bigger
the mesh is the longer the crushed material will be and the larger
the output will be. The mesh should be chosen in production
according to the type of the material.
2. The crushed material (mixture of copper granules and plastic
pieces) is conveyed to the separator by the conveyor, during which
procedure dust and part of plastic pieces of light weight(including
fiber, rope, or tapes, etc. mixed in the wires) are collected by
the pressure-reducing blower. The above opening of the pressure
reducing blower is connected with the dust collector opening in
which a dust collecting bag is used to prevent discharge of dust
for the purpose of environmental protection. Dust and part of
plastic pieces of light weight are collected in this bag and will
be discharged when the bag is full.
3. The separator is used for separating plastic pieces and copper
granules. According to the differences of the physical properties
and specific gravity between different materials, there is specific
gravity deviation under the forces of Aerodynamic and Vibration
friction. By adjusting the speed of material conveying and
amplitude parameters, copper granules (of larger specific gravity)
will move to the riddle bottom and move from down to up, and
plastic pieces (of smaller specific gravity) will move to the above
of copper granules and move from up to down, and in the end they
will both be discharged through different openings.
4. All the units are installed on the underbed to form a whole
structure. The machine is adjusted ready for production before
shipping, and the customer only need to connect it to the power
1. Cable stripper: if customer deal with large size copper wires
with multi-strand,it is better to separate its cores and then put
them into granulator machine.
2. Double shaft crusher: If the raw material is with large lenth,
it will be helpful to cut them to smaller pieces before
3. Blade sharping machine: After long time operating, blades on the
granulator machine need maintiance to get good sharpness.
4. Megnatic conveyor: If there is a small part iron mixing inside
the copper wire, we can add a magnatic conveyors to take out of the
iron mixing of the copper pellet to get high purity.
5. Belt conveyor: It is supplied to customer who required totally
automatic copper wire feeding.